|
REF. NO. |
STATUS |
SCOPE |
|
EN340 |
European standard - This standard is a reference
standard to refer to in other standards. This
standard can not be applied alone but only
inassociation with a specific product standard.
|
This
standard specifies the general requirements:
¡¡ergonomic requirements, sizing, ageing,
marking, information for the user for protective
clothing |
|
EN369 |
European Standard - Test method |
This
standard specifies a test method to assess the
resistance to permeation of materials used in
chemical protective clothing |
|
EN466 |
European Standard - Product specification (type
3 chemical protective clothing) |
This
standard specifies the requirements for
protective clothing against liquid chemicals
type 3 (liquid-tight). Requirements cover
properties (mechanical/chemical) of the
materials and of the complete clothing. |
|
EN471 |
European standard - product
specification (high visibility). |
This standard specifies the
requirements for protective clothing aiming to
signal the presence of the wearer visually in
daylight as well as under illumination by
headlights of cars. These requirements cover the
area of materials used, their colour and
retroreflection |
|
EN366 |
European Standard - Test
method |
This standard specifies a
test method to assess the behaviour (structural
changes, heat transfer) of clothing materials
and material assemblies when exposed to a
radiant heat source, emitting a specific heat
flux (in kW/m²) |
|
EN373 |
European Standard - Test
method |
This standard specifies a
test method to assess the resistance of
materials and material assemblies to splashes of
molten metals |
|
EN467 |
European Standard - Product
specification (partial body protection) |
This standard specifies the
requirements for protective clothing against
liquid chemicals, covering only a part of the
body, e.g. aprons, sleeves, hoods, trousers,
gaiters, etc. Requirements cover properties
(mechanical/chemical) of the materials and of
the complete clothing. |
|
EN367 |
European Standard - Test
method |
This standard specifies a
test method for comparing the heat transmission
through materials or material assemblies used in
protective clothing. |
|
EN469 |
European Standard - Product
specification (fire fighters) |
This standard specifies the
requirements for protective clothing for
structural fire fighting, considering mainly
protection against heat and flame. This standard
does not cover protective clothing for special
tasks or risks, e.g. clean-up of chemical
spills, forest fires, fire fighting at close
proximity of the fire, assistance in road
emergencies, etc. |
|
EN531 |
European Standard - Product
specification (industrial heat and flames) |
This standard specifies the
requirements for protective clothing against
heat and flames.
Hoods and leg protectors are covered by the
standard, whereas head, hand and foot protection
are not. |
|
EN368 |
European Standard - Test
method |
This standard specifies a
test method for the measurement of the
penetration of a liquid chemical through
protective clothing |
|
EN465 |
European Standard - Product
specification (type 4 chemical protective
clothing) |
This standard specifies the
requirements for protective clothing against
liquid chemicals type 4 (spray-tight).
Requirements cover properties
(mechanical/chemical) of the materials and of
the complete clothing. |
|
EN470-1 |
European Standard - product
specification (welding) |
This standard specifies the
requirements for protective clothing worn during
welding operations. The standard covers
protective clothing to be worn at ambient
temperature for a 8 hour period and offering
protection against small projections of molten
metal, accidental contact with a flame, and UV
radiation. The standard does not cover the
protective clothing worn during special welding
operations. |
|
EN533 |
European Standard - material
specification |
This standard specifies the
requirements for the limited flame spread
properties of materials and materialassemblies |
|
prEN1511 |
European draft standard -
Product specification (type 3 limited use
chemical protective clothing) |
This draft standard specifies
the requirements for protective clothing against
liquid chemicals type 3 (liquid-tight).
Requirements cover properties
(mechanical/chemical) of the materials and of
the complete clothing. |
|
EN1149-1 |
European Standard |
This standard defines a test
method and requirements for electrostatic
properties of protective clothing. |
|
prEN1512 |
Draft European Standard -
Product specification (type 4 chemical
protective clothing limited use) |
This standard specifies the
requirements for limited use protective clothing
against liquid chemicals type 4 (spray-tight).
Requirements cover properties
(mechanical/chemical) of the materials and of
the complete clothing. |
|
prEN13034 |
Draft European Standard -
Product specification (type 6 chemical
protective clothing) |
This draft standard specifies
the requirements for protective clothing
(coverall or two pieces suit) against liquid
chemicals (type 6). Requirements cover
properties (mechanical/chemical) of the
materials and of the complete clothing. |
|
prEN1513 |
Draft European Standard -
Product specification (limited use clothing -
partial body protection) |
This draft standard specifies
the requirements for limited use protective
clothing against liquid chemicals, covering only
a part of the body, e.g. aprons, sleeves, hoods,
trousers, gaiters, etc. Requirements cover
properties (mechanical/chemical) of the
materials and of the complete clothing |
|
prEN1486 |
European Standard - Product
specification (fire fighters) |
This standard specifies test
performance requirements for reflective
protective clothing used in specialized fire
fighting. This standard covers only protective
clothing that relies on the ability to reflect
intense radiant heat. This type of clothing may
also be used for industrial applications
involving high levels of radiant heat. |
